Hydrotech 7000 Master Programming Mode Instrukcja Użytkownika Pobierz pdf (Strona 4)

7000 Master Programming Mode

Page 4

3. Regeneration Type (Display Code 7)

Use this program step, identified by the number 7 in the first digit of the display, to set the Regeneration Type.

There are 4 possible settings:

Default =

Meter Delayed Regeneration [ 7 - - 3 ]

Available Regeneration Types and their Dependencies

—Use the Set Up and Set Down buttons to adjust this value.

— Press the Extra Cycle button to proceed to the next step.

Time Clock Delayed Setting: [ 7 - - 1 ]

The control regenerates on the days set in program step #7, at the Regeneration Time

set in program step #6.

Meter Immediate Setting: [ 7 - - 2 ]

The control regenerates immediately when the available volume of softened water drops to 0.

Meter Delayed Setting: [ 7 - - 3 ]

The control regenerates on the day the available volume of softened water drops to less than the reserve

volume. Regeneration starts at the Regeneration Time set in program step #6.

Meter Delayed - Variable Brining Setting: [ 7 - - 4 ]

The control regenerates on the day that the available volume of softened water drops to or below the reserve

volume. Regeneration starts at the Regeneration Time set in program step #6. With the variable brining

option activated, the time setting for Cycle 1 is automatically calculated based on the volume of treated water

at the time of regeneration. Cycle time 1 will not exceed the original time setting and is never less than one (1)

minute.

Piston / CAM Type Regeneration Types Available

dF [ 7 - - 1 ], [ 7 - - 2 ], [ 7 - - 3 ]

dFFF [ 7 - - 1 ], [ 7 - - 3 ], [ 7 - - 4 ]

Fltr [ 7 - - 1 ]

Default

dF [ 7 - - 3 ]

1 2 3 4 5 6 7 8 9 10

Brak uwag

Hydrotech 7000 Master Programming Mode Instrukcja Użytkownika Strona 4